Produse pentru 74hc595 esp8266 (16)

HCMOS TCXO at 32.768kHz or from 20kHz to 50kHz. 7.0 x 5.0mm SMD package. Stability from ±1ppm -30°~+75°C Miniature 7 x 5 x 2.3mm SMD package Frequency range: 20.0kHz to 52.7kHz including 32.768kHz Supply voltage +3.3 Volts Frequency stability from ±1ppm over -30 to +75°C RoHS compliant Product Series Code TCXO:EM572T VCTCXO: VEM572T Frequency Range:20.0kHz to 52.7kHz Standard Frequency:32.768kHz Output Waveform:Squarewave, HCMOS Initial Calibration Tolerance:<±2.0ppm at +25°±2°C Frequency Stability vs. Ageing:±1.0 ppm max. first year vs. Voltage Change: ±0.2 ppm max. ±5% change Supply Voltage:+3.3 V Output Logic Levels:Logic High: 90% Vdd min Logic Low: 10% Vdd max Rise and Fall Times:10ns max Duty Cycle:50%±10% standard, 50%±5% option Start-up Time:10ms max Output Load:15pF Storage Temperature:-55~+125°C

Tissu 50% COTON 50% POLYESTER chaine & trame Retors, armure toile 1/1 430g/m2, 102, 150, 205 & 247cm, traite 2i (imperimpu) Principales utilisations:sacs, pochettes, cabas, bagagerie, baches, entoilages de tentes

Epoxy fibre-glass FR4 1.50 mm Double-sided 35 µm Cu Plated through holes (PTH) Surface chem. Sn SMD hole spacing 1.27 x 1.27 mm 108 x 69 soldering pads 1.00 x 1.00 mm (7452 soldering pads) 4 potential strips Connector 32/64/96-channel DIN 41612 type C Size 100 x 160 mm

support 48*100Gb/s DWDM System and up to 80 km transmission on SM fiber - Product Function Hot pluggable QSFP28 MSA form factor Up to 80km reach for G.652 SMF with transport white box Single +3.3V power supply Temperature Range 0 to 70°C Transmitter: Cooled EML 2*27.5Gbaud/s DWDM TOSA Receiver: 2*27.5Gbaud/s Pin-PD ROSA 4*25G CAUI4 electrical interface Integrated SFEC with high coding gain PAM4 modulation format on 100GHz ITU DWDM wavelength grid compatible Dual CS adaptor Compatible with RoHS6

433.92MHz ASK Superhet Receiver Module. Low cost version

Der variable Digitalverstärker EHDS konvertiert das Eingangssignal eines Dehnungssensors oder einer Lastdose in ein analoges Volt-Ausgangssignal. Zusätzlich ist das Ausgangssignal digital verfügbar. Merkmale Der EHDS Signalverstärker ist für dynamische und statische Anwendungen geeignet. Merkmale: - Verstärker mit schnellem Analog- und Digitalausgang - Für dynamische und statische Anwendungen - Grosser Offset-Bereich für die Messbrücke - optional stabiles Aluminiumgehäuse (IP65) oder Gehäuse für DIN-Schiene - kostenlose Anwendungssoftware und DLL-Datei zur Erstellung nutzerdefinierter Software

FPC Connector, Pitch 0.5mm, SMT, right angle, flip-lock type, height 1.0mm

Der Arbeitsspeicher eines PCs (Random Access Memory, RAM) ist ein wichtiger Bestandteil des Computers, da er temporäre Daten speichert, auf die der Prozessor schnell zugreifen kann. Der RAM arbeitet in Kombination mit der Festplatte, um die Leistung des Computers zu verbessern. Der RAM wird in Form von DIMM Modulen auf dem Motherboard des PCs installiert und ist in verschiedenen Größen (4GB und 8GB) und Geschwindigkeiten (1600MHz und 1866MHz) erhältlich. Wenn ein Programm auf einem PC ausgeführt wird, lädt der RAM den benötigten Code und die benötigten Daten in den Speicher. Je größer der RAM, desto mehr Programme können gleichzeitig ausgeführt werden, ohne dass es zu Verzögerungen kommt. Ein zu kleiner RAM kann dazu führen, dass der Computer langsam wird und möglicherweise einfriert oder abstürzt.

The ecoHarmony EPC 2.0 Lite is an entry level option in the EPC 2.0 family of EVSE controllers. It is the same form-factor DIN rail mounted module designed for IEC 61851 compliant EV charge points, but simplified for certain applications. The 35mm wide module can support 1 charging outlet; either a socket outlet or a tethered cable, and has an option for 6mA DC leakage detection that help charge point manufacturers and installers meet regulations in a cost-effective way. The IC input allows for configurable charging current as well as enabling access control expansion options with other hardware, including impulse signals to enable charging. It has an internal status indicator LED and support for an external LED.

Firecomms’ SMI transceivers comply to the IEEE1394b standard developed for communication over plastic optic fiber. The Small Media Interface has a small form factor with plug options that include a self releasing lock on the plug offering pull force on the cable in excess of 100 N. Non-magnetic versions are available for Medical device applications.

The SenseCeiver Wireless Sensor Gateway has been developed specifically for industrial 4-20mA sensors and by using energy-saving components excellent energy efficiency was achieved. It has thanks to its optimized hardware and software a particularly long battery life and also enables a solar operation. Measure and monitor via the galvanic isolated electrically input for sensors everything you need for your IoT applications. Wireless Sensor Gateway has an additional 12V battery connector to also be able to supply the industrial sensor with voltage. Data can be sent by SMS or GPRS to a device of your choice or to a cloud. It uses a dual-band GPRS modem. The Wireless Sensor Gateway can reach up to 6 months continuous operation on battery power with a 1.35AH battery under optimum working conditions. The Wireless Sensor Gateway switches to sleep mode after sending data which is controlled by a Microchip PIC. The data are sent at preset intervals via HTTP or SMS. The Wireless Sensor...

1.25G BIDI SFP Optical Transceiver Features Supports1.25Gb/s bit rate Bi-direction transmission, LC Connector Hot Pluggable SFP form factor Digital diagnostic monitoring support Single 3.3V power supply RoHS-10 compliant and lead-free All-metal housing for superior EMI performance Case operating temperature:0℃ to+ 70℃/ -40℃ to +85℃

Epoxy fibre-glass FR4 0.80 mm Double-sided 35 µm Cu Plated through holes (PTH) Surface chem. Sn SMD hole spacing 1.27 x 1.27 mm 40 x 60 soldering pads 1.00 x 1.00 mm Hole diameter 0.35 mm 2 grids 2.54 x 2.54 mm (1/20") 17 x 32 and 18 x 32 soldering pads 2.00 x 2.00 mm Hole diameter 1.00 mm Connector 32/64/96-channel DIN 41612 type C Size 100 x 160 mm

0.3mm, ZIF type, SMT, right angle, flip-lock, H=0.6mm

0.3mm, ZIF type, SMT, right angle, flip-lock, H=0.9mm

8pin, 1.0mm, non ZIF, SMT, top entry, reel+mylar packing